Electromagnetic Smart Water Meter

The smart electromagnetic water meter without tap is a highly advanced, high-precision electromagnetic water meter (R200). This meter can be installed on agricultural wells, diesel, electric pumps and gravity flows, and due to its integrated body, it is resistant to damage and the entry of any external factor and has an IP68 protection factor. This water meter is considered the best solution in the field of non-revenue water (NRW) due to its high dynamic range, and in this regard, it has also received the “Approval from the Ministry of Energy and Water Resources of Iran” license as one of the few licensed companies in Iran. Electromagnetic meter technology is one of the technologies of IFA Sanat Gharb Company, which is produced from zero to 100 by the company’s engineers in a knowledge-based manner. High performance Easy Mag performs water measurement several times per second, so it enables measurement with high accuracy and stability through intelligent data error correction technology. Installation in all horizontal and vertical positions Can be used in agricultural and industrial wells, diesel pumps and gravity flows No need for periodic calibration No need for any mechanical parts in the water path Ability to manufacture with various accuracies (0.3% - 0.5% - 1%) upon request With internal battery with 5-year warranty and 100-200 volt AC power input Ability to apply quotas by defining different time intervals for up to 20 periods Ability to detect well aeration Ability to measure returned water IP68 design The protection level (1 meter, 1 hour) for this meter has been approved. Protection against the penetration of any dust and protection against the penetration of water in continuous immersion at a depth of one meter for one hour can be guaranteed for this device. A suitable solution for non-revenue water (NRW) This device is a powerful solution for addressing non-revenue water (NRW) with the ability to issue disconnection and connection commands by the meter and central control system and supporting Broad Cast, as well as the ability to disconnect and connect the electric valve in battery-powered devices with a guarantee of the device's battery operation for at least 5 years, measuring the amount of water flowing with an accuracy of ± 1%, and preventing hardware tampering and violation by having protective seals and sensors built into the device. Smart electromagnetic water meter without tap Data transfer This device has an optical port for communication with a local handheld reader; according to the standard (2002: IEC 62056-21). It has a high-capacity internal memory to store various meter events with advanced memory protections. It has the ability to configure the system and upgrade software via GPRS. It has an internal data logger with the ability to send information via GPRS and has GPS with an internal active antenna. Unique features of this meter This meter has an RTC clock with the ability to synchronize with GPRS by central software and local software and supports Day Light Saving and solar date. It supports RFID cards of the Mifare or DesfireEv type with advanced locking 3DES, AES128 and AES256 (according to ISO 7816 standard). The operating temperature of the device is from minus 40 degrees to plus 80 degrees and the operating humidity range is 98% to 0. This device has a 3.5-inch graphic LCD display with backlight adjustment and automatic adjustment of the display contrast Temperature Correction. It also has the ability to connect to a separate circuit breaker panel with a Wired M-Bus network protected against manipulation. It has an isolated Wired M-Bus port for communication with the meter and an isolated 485 port. It is equipped with a shock sensor, magnetic field detection, temperature, meter door opening, well door entry and panel opening and has a relay output for commanding the pump or diesel engine to be turned off or the power to be cut off.